Skip to main content




Voorbeeld single speed carbon wiel, Notorious 90, 90 mm hoog met Victoire naaf (hoge flens), Sapim Race spaken, 16 mm nippels (conform voorschrift) messing.






Voorwiel radiaal gespaakt


Single speed: Mavic Open Pro, Surly Fixed/free naaf, Sapim CX Ray silver



Phil hubs

Sturmey Archer


Novatec low flange


Novatec high flange




White Industries Standard ENO

Single speed standard ENO hubs are designed for bikes with horizontal dropouts or with eccentric bottom brackets. The standard ENO hub is freewheel compatible and comes stock as a bolt on style hub complete with frame affixing hardware, however, the hub can be ordered with quick release adaptors. The hub comes stock as single sided threaded for an English threaded freewheel, however, can be custom configured as a flip/flop upon request. The disc ENO is ISO standard six bolt rotor on the non drive side and freewheel compatible on the drive side. Made in the USA.


White Industries Eric’s eccentric ENO

Our Eccentric ENO line of hubs are made specifically for bikes with vertical dropouts. The majority of bicycle frames made today are made with vertical dropouts, however, converting the frame to a single speed presents the problem of how to tension the chain. Chain tension with vertical frames can be addressed three ways: by using a chain tensioner, using an eccentric bottom bracket, or with our Eccentric ENO. The Eccentric ENO is an easy, clean, and simple answer to the problem. The eccentric rear hub allows the rider to adjust the chain tension by simply rotating the elliptical axle ends up and back in the dropouts. As the hub rotates back, the chain is pulled into tension. The Eccentric ENO is available in two models: The Eric’s Eccentric ENO and Eccentric Disc ENO. The Eric’s Eccentric ENO is a flip/flop design fixed/free. The disc model has an ISO standard six bolt rotor on the non-drive side and is freewheel compatible on the drive side. We recommend running the Eccentric Disc ENO with the eccentric caliper mount adaptor featured below. Made in the USA.






BLB Hubs

Close Menu

Snel contact


Schaesbergerweg 169
6415 AG Heerlen
T: +31 (0)6 10 85 90 87

Ik heb een goed geoutilleerde werkplaats waarin ik wielen bouw. Bel voor een afspraak en kom gerust even binnen. Alleen op afspraak!